Lan; Ipv4; Lan Settings - D-Link DWM-312 User Manual

Section 4 - Con guration
This section allows you to change the local network settings of your router and to con gure the DHCP Server settings. IPv4 and IPv6 are con gured
seperately.
Enter the IP address you want to use for the router. The default
Router IP Address:
IP address is 192.168.0.1. If you change the IP address, you will
need to enter the new IP address in your browser to get into the
con guration utility.
Enter the subnet mask of the router. The default subnet mask is
Default Subnet
255.255.255.0.
Mask:
Enter the local domain name for your network.
Local Domain
Name:
Click this to con gure the Router Information Protocol (RIP),
Dynamic Route:
described on the following page.
Click this to toggle LAN snooping, described on the following
LAN Snooping:
page.
Click Apply to save your settings, or Refresh to revert to your
previous settings.
D-Link DWM-312 User Manual

LAN

IPv4

LAN Settings

20