Protocol Bindings; Figure 31: Load Balancing Is Available When Multiple Wan Ports Are Configured And Protocol Bindings Have Been Defined - D-Link DSR-250N User Manual

Unified Services Router
Figure 31: Load Balancing is available when multiple WAN ports are configured and
Protocol Bindings have been defined

3.4.3 Protocol Bindings

Advanced > Routing > Protocol Bindings
Protocol bindings are required when the Load Balancing feature is in use. Choosing from a list of
configured services or any of the user-defined services, the type of traffic can be assigned to go over
only one of the available WAN ports. For increased flexibility the source network or machines can
be specified as well as the destination network or machines. For example the VOIP traffic for a set
of LAN IP addresses can be assigned to one WAN and any VOIP traffic from the remaining IP
addresses can be assigned to the other WAN link. Protocol bindings are only applicable when load
balancing mode is enabled and more than one WAN is configured.
50
User Manual