Table of Contents
Advertisement
Crestron QM-FTSC
Operations & Installation Guide – DOC. 6269
3. Enter the serial number or TSID number as instructed; press the
appropriate button to obtain the corresponding number.
NOTE: Enter serial numbers, including spaces, exactly as they appear on the
unit label. Alpha characters in serial numbers or TSID numbers may be entered
in upper or lower case.
Installation
Supplied Parts
Part
Small Cable Bushing, 5/16 inch ID, 0.5 inch OD
Large cable Bushing, 0.55 inch ID, 0.80 inch OD
Cable Support Plate
LG Black screw #4 x 3/16, Pan Head, Phillips
Screw #6-32, Pan Head, Phillips
Screw #10, Pan Head, Phillips
Mounting Bracket
Tie Wrap
Composite Video Cable, RCA to RCA, 6 ft long, with "VIDEO"
Label
Audio Cable, RCA to RCA, 6 ft long, with "AUDIO-L" label
Audio Cable, RCA to RCA, 6 ft long, with "AUDIO-R" label
S-Video Cable, 6 ft long
Computer RGB Cable, VGA to VGA, 6 ft long
Computer Audio Cable, 3.5 mm Stereo, 6 ft long
Tools Required
Phillips screwdriver
•
Small flat-blade screwdriver (for connecting the VGA cable)
•
Cable Support Plate
The cable support plate must be installed first.
1. Place the bushings on the cables (nine bushings supplied). Use the large
bushing for the VGA cable.
2. Thread the cables through the appropriate slot on the plate.
3. Snap the bushings into the plate slots.
4. Feed all the excess cable through the opening.
5. Attach the plate using the four #4 x 3/16 LG black screws supplied.
6. Connect the cables to the bottom of the QM-FTSC.
7. Secure the cables to the bottom bar using the tie wraps (nine tie wraps
are supplied).
FlipTop Storage Center
FlipTop Storage Center: QM-FTSC • 15
Quantity
8
1
1
4
8
4
2
9
1
2
2
1
1
1
Advertisement
Table of Contents
