Table of Contents
Advertisement
Crestron QM-FTSC
File Transfer | Load Network Device... Command
Operations & Installation Guide – DOC. 6269
3. As shown in the "Select Network ID" window, select the Net ID of the
QM-WMC portion of the QM-FTSC, and then click OK. The "Open"
window appears (refer to the following graphics).
"Select Network ID" Window
NOTE: If problems arise when transferring any Cresnet file (touchpanel
project/firmware), lower the port speed baud rate to 38400 to match the Cresnet
bus speed.
FlipTop Storage Center
FlipTop Storage Center: QM-FTSC • 39
Advertisement
Table of Contents
