Table of Contents
Advertisement
Crestron QM-FTSC
Typical Connection Diagram when Uploading
QM-FTSC
Computer
Operations & Installation Guide – DOC. 6269
Cresnet Cable
QuickMedia Cable
QM-RMCRX (Rear)
Null-modem RS-232 cable with DB9
female connectors on both ends
NOTE: Use a standard DB9 "Null-Modem" cable.
NOTE: QuickMedia cable is CAT5E type. The total accumulated skew from
QM transmitter to QM receiver must not exceed 15 ns (nanoseconds). Crestron
recommends a cable with a rating of less than or equal to 15 ns over its entire
length.
1. Open the Crestron Viewport. Either launch the stand-alone version of
Viewport, or start SIMPL Windows and from the menu bar, select
Tools | Viewport.
2. Refer to the figure after this step. From the Viewport menu, select
Setup | Communications settings (alternatively, press Alt+D) to open
the "Port Settings" window.
FlipTop Storage Center
QM-RMCRX (Front)
FlipTop Storage Center: QM-FTSC • 35
Advertisement
Table of Contents
