Table of Contents
Advertisement
FlipTop Storage Center
File Transfer | Update Touchpanel/Keypad Firmware Command
40 • FlipTop Storage Center: QM-FTSC
"Open" Window
4. Browse to the desired [filename].upg file and click Open to begin the
transfer.
Button Panel Firmware
To upgrade the Button Panel firmware, complete the following steps.
1. Make sure that "Communication Settings," which begins on page 20,
has been performed.
2. As shown after this step, select File Transfer | Update
Touchpanel/Keypad Firmware from the Viewport menu bar.
3. As shown in the "Select Network ID" window, select the NET ID of
the C2N-DB6, and then click OK. The "Open" window appears (refer
to the following illustration).
Crestron QM-FTSC
Operations & Installation Guide - DOC. 6269
Advertisement
Table of Contents
