Table of Contents
Advertisement
Crestron QM-FTSC
Operations & Installation Guide – DOC. 6269
Earliest Version Software Requirements for the
PC
NOTE: Crestron recommends the use of SystemBuilder and Digital Media
Tools software for creating and fine-tuning a QuickMedia system.
NOTE: Crestron recommends that you use the latest software to take advantage
of the most recently released features. The latest software is available from the
Downloads | Software Updates section of the Crestron website
(www.crestron.com).
NOTE: Crestron software and any files on the website are for Authorized
Crestron dealers and Crestron Authorized Independent Programmers (CAIP)
only. New users may be required to register to obtain access to certain areas of
the site (including the FTP site).
The following are the earliest useable software version requirements for the PC:
•
(Optional) SystemBuilder (Requires SIMPL Windows).
•
SIMPL Windows version 2.05.08 or later. Requires SIMPL+
Compiler version 1.1.
•
Crestron Database version 16.2.0 or later. Required by SIMPL
Windows.
•
Digital Media Tools software version 3.00.00 or later.
Configuring with Crestron SystemBuilder
NOTE: The QM-FTSC is configured with Crestron SystemBuilder version 1.0
software. As of press time, this version of Crestron SystemBuilder had not been
released. Please check the Crestron FTP site.
The Crestron SystemBuilder interface guides you through a few basic steps for
specifying the control system, designating rooms and touchpanels, devices, and
functionality. The Crestron SystemBuilder then configures the system, including
all touchpanel projects and control system logic, including Crestron
RoomView™ management software.
The Crestron SystemBuilder is fully integrated with the Crestron suite of
software development tools, including SIMPL Windows, Cross Compiler, VT
Pro-e, Crestron Database, User IR Database, and User Modules Directory. The
Crestron SystemBuilder accesses all these tools behind the scenes, enabling you
to easily create robust systems.
SystemBuilder provides a step-by-step process that guides the user through the
process of selecting components and determining signal routing and control. The
control code and complete equipment lists are automatically generated. Crestron
SystemBuilder automatically compiles and uploads your program to the control
system.
FlipTop Storage Center
FlipTop Storage Center: QM-FTSC • 21
®
Cross
Advertisement
Table of Contents
