Crestron TPS-MEM128MB Installation Manual
Crestron TPS-MEM128MB Installation Manual

Crestron TPS-MEM128MB Installation Manual

Flash memory for tps user interfaces

Advertisement

Quick Links

Crestron TPS-MEM64MB & TPS-MEM128MB
Flash Memory for TPS User Interfaces
Installation Guide

Advertisement

Table of Contents
loading

Summary of Contents for Crestron TPS-MEM128MB

  • Page 1 Crestron TPS-MEM64MB & TPS-MEM128MB Flash Memory for TPS User Interfaces Installation Guide...
  • Page 2 This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2004 Crestron Electronics, Inc.
  • Page 3: Table Of Contents

    Crestron TPS-MEM64MB & TPS-MEM128MB Contents Flash Memory for TPS User Interfaces: TPS-MEM64MB & TPS-MEM128MB Introduction...1 Features and Functions ...1 Physical Description ...2 Industry Compliance...2 Verifying Installed Memory ...2 Local Verification ...2 Remote Verification...2 Memory Module Expansion Compatibility ...4 Tilt Model Inspection Procedure ...5 Lectern Model Inspection Procedure ...5...
  • Page 5: Flash Memory For Tps User Interfaces: Tps-Mem64Mb & Tps-Mem128Mb

    • Improves performance when loading and running large and complex programs • Latest TPS firmware is already installed for access to latest TPS features Installation Guide - DOC. 6261 Flash Memory for TPS User Interfaces: TPS-MEM64MB & TPS-MEM128MB • 1 Flash Memory...
  • Page 6: Physical Description

    To remotely view the amount of memory that is installed in a TPS device, the Crestron Viewport must be used. 2 • Flash Memory for TPS User Interfaces: TPS-MEM64MB & TPS-MEM128MB Crestron TPS-MEM64MB & TPS-MEM128MB Installation Guide - DOC. 6261...
  • Page 7 4. Click OK. The TPS> prompt will be displayed in the Viewport window. 5. At the TPS> prompt, type SHOWHW and press Enter. The Viewport replies with a list of configuration information. Installation Guide - DOC. 6261 Flash Memory for TPS User Interfaces: TPS-MEM64MB & TPS-MEM128MB • 3 Flash Memory...
  • Page 8: Memory Module Expansion Compatibility

    TPS-MEM64MB and TPS-MEM128MB. To verify whether a specific TPS device is compatible with the memory expansion module, perform one of the following inspection procedures. 4 • Flash Memory for TPS User Interfaces: TPS-MEM64MB & TPS-MEM128MB Crestron TPS-MEM64MB & TPS-MEM128MB PART NUMBER...
  • Page 9: Tilt Model Inspection Procedure

    The latest version of the appropriate Operations Guide is available from the Downloads | Product Manuals section of the Crestron website (www.crestron.com). Installation Guide - DOC. 6261 Flash Memory for TPS User Interfaces: TPS-MEM64MB & TPS-MEM128MB • 5 Flash Memory...
  • Page 10 Place the touchpanel upright on the work surface. As shown in the following diagram, remove the touchpanel base cover by raising it upwards and rearward. 6 • Flash Memory for TPS User Interfaces: TPS-MEM64MB & TPS-MEM128MB Crestron TPS-MEM64MB & TPS-MEM128MB Installation Guide - DOC. 6261...
  • Page 11 If there is no video expansion card, continue with the next step. TPS-VID-1 / TPS-VID-2 Removal Installation Guide - DOC. 6261 Flash Memory for TPS User Interfaces: TPS-MEM64MB & TPS-MEM128MB • 7 Flash Memory...
  • Page 12 Jumper Location FOR TPS-MEM-64MB AND TPS-MEM128MB, MOVE JUMPER TO 3.3V POSITION 8 • Flash Memory for TPS User Interfaces: TPS-MEM64MB & TPS-MEM128MB Crestron TPS-MEM64MB & TPS-MEM128MB LOCATION OF JUMPER FOR SELECTING VOLTAGE Installation Guide - DOC. 6261...
  • Page 13 14. Use even pressure while backing out the original module out of the socket. Installation Guide - DOC. 6261 LOCATION OF MEMORY SOCKET WITH MEMORY MODULE Flash Memory for TPS User Interfaces: TPS-MEM64MB & TPS-MEM128MB • 9 Flash Memory...
  • Page 14: Lectern Model Installation Procedure

    NOT installed into a wall or lectern. If already installed, refer to the latest revision of the user interface Operations & Installation Guide or, if 10 • Flash Memory for TPS User Interfaces: TPS-MEM64MB & TPS-MEM128MB Crestron TPS-MEM64MB & TPS-MEM128MB...
  • Page 15 Remove the rear cover as shown in the following diagram by sliding it towards the bottom of the device. Installation Guide - DOC. 6261 Flash Memory for TPS User Interfaces: TPS-MEM64MB & TPS-MEM128MB • 11 Flash Memory...
  • Page 16 4a. If the expansion cover plate is present, refer to the 12 • Flash Memory for TPS User Interfaces: TPS-MEM64MB & TPS-MEM128MB Crestron TPS-MEM64MB & TPS-MEM128MB following diagram. Using a #1 Phillips screwdriver, loosen and remove the two screws that secure the expansion cover plate and remove the plate.
  • Page 17 Flash Memory for TPS User Interfaces: TPS-MEM64MB & TPS-MEM128MB • 13 Flash Memory...
  • Page 18: Jumper Location

    Move the jumper to the 3.3V position by placing the jumper over the center pin and the pin labeled 3.3V as shown in the following diagram. 14 • Flash Memory for TPS User Interfaces: TPS-MEM64MB & TPS-MEM128MB Crestron TPS-MEM64MB & TPS-MEM128MB Installation Guide - DOC. 6261...
  • Page 19 Installation Guide - DOC. 6261 CRESTRON ELECTRONICS INC. ROCKLEIGH, NJ 07647 USA AUDIO INPUT MIC OUT 24 Y Z G RS-232 Flash Memory for TPS User Interfaces: TPS-MEM64MB & TPS-MEM128MB • 15 Flash Memory LOCATION OF MEMORY SOCKET WITH MEMORY MODULE...
  • Page 20 16 • Flash Memory for TPS User Interfaces: TPS-MEM64MB & TPS-MEM128MB Crestron TPS-MEM64MB & TPS-MEM128MB Installation Guide - DOC. 6261...
  • Page 21: Problem Solving

    Reverse polarity. polarity if necessary. Damaged Inspect module. If damaged, memory module. contact Crestron customer service. Voltage jumper in Move jumper to 3.3V position. incorrect position. Flash Memory for TPS User Interfaces: TPS-MEM64MB & TPS-MEM128MB • 17 Flash Memory...
  • Page 22: Further Inquiries

    Crestron website (www.crestron.com) for a listing of Crestron worldwide offices. You can also log onto the online help section of the Crestron website (www.crestron.com) to ask questions about Crestron products. First- time users will need to establish a user account to fully benefit from all available features.
  • Page 23: Return And Warranty Policies

    CRESTRON shall not be liable to honor the terms of this warranty if the product has been used in any application other than that for which it was intended, or if it has been subjected to misuse, accidental damage, modification, or improper installation procedures.
  • Page 24 Crestron Electronics, Inc. Operations Guide - DOC. 6261 15 Volvo Drive Rockleigh, NJ 07647 04.04 Tel: 888.CRESTRON Fax: 201.767.7576 Specifications subject to www.crestron.com change without notice.

This manual is also suitable for:

Tps-mem64mb

Table of Contents