Table of Contents
Advertisement
FlipTop Storage Center
14 • FlipTop Storage Center: QM-FTSC
"Set Net ID by TSID" Window
5. Enter either the serial number or TSID number of the device that
requires a change. The list scrolls to and highlights the device listing.
The listing should show the device's default Cresnet ID (a.k.a. Net ID).
6. Enter the Cresnet ID that the device should be set to and click OK. The
number you enter should appear on the list.
CAUTION: This function does not prevent you from setting duplicate IDs. Be
sure to check current assignments before entering the desired Cresnet ID
number.
Serial Number to TSID Conversion
This utility is useful in a case where there are multiple devices of the same type
on a network, you need to locate a particular one, you know the TSID but not
the serial number, and your site installation list is based on device serial
numbers. In this (or the reverse) situation, do the following:
1. Open the Crestron Viewport.
2. From the Viewport menu, select Functions | Serial Number
TSID Conversion Tool. The "Serial Number
Tool" window is displayed.
"Serial Number to TSID Conversion Tool" Window
Crestron QM-FTSC
Operations & Installation Guide - DOC. 6269
TSID Conversion
Advertisement
Table of Contents
