The Quickmedia Transport System - Crestron QM-FTSC Operation And Installation Manual

Fliptop storage center
Hide thumbs Also See for QM-FTSC:
Table of Contents

Advertisement

FlipTop Storage Center
QM-FTSCD Block Diagram
Cables
Composite Video
S-Video
Computer RGB
Composite Video Audio
S-Video Audio
Computer Audio
A/D
Converter
Input
Gain
2 • FlipTop Storage Center: QM-FTSC
NOTE: The QM-FTSC is compatible with 2-Series control systems only.
Keypad
3 X 1 Video Switch
A/D
Converter
3 X 1 Audio Switch
Video Sync Sensing

The QuickMedia Transport System

Using a new, proprietary signal routing solution, signals such as composite
video, S-video, RGBHV, audios, and microphone, are all transported using a
single cable solution called QuickMedia™ (QM).
The QM transport system port is capable of managing computer, video, and
audio signals simultaneously through one CAT5E/UTP1 wire, simplifying
installations.
Routing CAT5E/UTP1 cable is less expensive and much simpler than routing
multi-colored, multi-conductor coax cable. All Crestron products using the QM
transport system are capable of sending and receiving QM signals via standard
CAT5E unshielded twisted pair (UTP) cable. Crestron recommends Belden
Media-Twist cable, and Liberty Cable Crescat-QM. Installation of any QM
device is as simple as installing one set of QM wires from output to input.
Installations are flexible, affordable, and fast.
Crestron QM-FTSC
Buffer
Operations & Installation Guide - DOC. 6269
AC Power
MIC 1
MIC 2
QM
Program L
Output
Program R
Video
Cresnet
Cresnet

Advertisement

Table of Contents
loading

This manual is also suitable for:

Qm-ftsc-bQm-ftsc-balum

Table of Contents