Crestron QM-FTSC Operation And Installation Manual page 30

FlipTop Storage Center Crestron QM-FTSC
C2Net-Device, Slot 5
Setting the Net ID in Device Settings
Double-click the QM-FTSC icon in the upper pane to open the "Device
Settings" window. This window displays QM-FTSC device information. The
Net ID can be changed in this window using the Net ID tab, as shown in the
following figure.
"Device Settings" Window
NOTE: This procedure sets the Net ID for the QM-FTSC in the program only.
It does not automatically set the Net ID for the QM-FTSC itself. SIMPL
Windows automatically changes Net ID values of a device added to a program if
a duplicate device or a device with the same Net ID already exists in the
program. Always ensure that the hardware and software settings of the Net ID
match. For Net ID hardware setting details, refer to "Identity Code" on page 12.
Symbols in Programming Manager
Three symbols make up the QM-FTSC: Basic Controls, Microphone Controls,
and Keypad. These symbols may be opened in Detail View.
26 • FlipTop Storage Center: QM-FTSC
Operations & Installation Guide - DOC. 6269