Specifications - Crestron QM-FTSC Operation And Installation Manual

FlipTop Storage Center
4 • FlipTop Storage Center: QM-FTSC

Specifications

Specifications for the QM-FTSC are given in the following table.
QM-FTSC Specifications
SPECIFICATION
Power Requirements
Default Network IDs
Video Formats
Video Detection
Firmware
2-Series Control System
1,2
Update Files
Connectors
Computer Input
Computer Output
Computer Audio
Composite Video
Composite Video Audio
S-video
S-video Audio
QuickMedia Output
Cresnet
Ground
Microphone
Video
Types
Video Sensing
Gain
Maximum Input Voltage
Input Impedance
Bandwidth
(Composite &
S-video)
Max Resolution/Refresh
Rate (RGB)
H and V Sync (RGB)
Specifications continued on next page.
Crestron QM-FTSC
DETAILS
8 Watts (0.33 Amp @ 24 VDC)
04 (QM-WMC/QM-WMIC)
73 (C2N-DB6)
Composite, S-video, RGBHV
Within 2 seconds
QM-WMC.V.2.24.upg or later
PK_C2NDB6.V1.00a.csf or later
Version 3.093.CUZ or later
(1) DB15HD female, video sensing on H-sync
(1) DB15HD female for monitor out
(1) 3.5mm mini-jack, computer soundcard type
(1) RCA (yellow), video sensing
(2) RCA (red and white)
(1) Mini-DIN 4-pin, video sense on luminance
signal
(2) RCA (red and white)
(1) RJ-45 CAT5
(2) 4-pin terminal block
(1) Ground Terminal
(2) Neutrik Combo: XLR & ¼" phone per input
Composite, S-video, and RGB
Automatic sensing of composite, S-video
(luminance), and RGB (H-Sync) with
corresponding LED indicators
0 dB (unity gain, 75 Ohm termination)
1.0 V p-p
75 ohms
> 100 MHz (-3 dB) at unity gain
1600 x 1200 @ 60 Hz vertical rate with
CAT5/5E/6 cable length of 100 meters and
skew rating ≤ 15 ns / 100 meters
5.0 V p-p max into 1 KΩ
Operations & Installation Guide - DOC. 6269
3