Table of Contents
Advertisement
FlipTop Storage Center
Ground Wire Connections
QM-RMCRX
Ground Wire to
Earth Ground
Configuration Software
20 • FlipTop Storage Center: QM-FTSC
Ground Wire Connections
Proper grounding is required. Connect the ground from the QM transmitter
(QM-FTSC) to earth ground. Connect the Cresnet shield at the QM-RMCRX to
the chassis ground provided on the QM-RMCRX. The QM-RMCRX chassis
must also be connected to an earth ground (building steel). Refer to the
following grounding diagram.
24
Y
Z
G
Cresnet
Ground Wire
NOTE: Do not connect the shield to earth ground at the QM-FTSC
Have a question or comment about Crestron software?
Answers to frequently asked questions (FAQs) can be viewed in the Online Help
section of the Crestron website (www.crestron.com). To post a question or view
questions you have submitted to Crestron's True Blue Support, log in at
http://support.crestron.com. First-time users will need to establish a user
account.
Configuration is easy thanks to Crestron's Windows-based programming
software. Crestron SystemBuilder™ software creates a complete project, with
no special programming required. SystemBuilder completes all necessary
programming for a base system including all touchpanel screens and the control
system program. The program output of SystemBuilder is a SIMPL Windows
program with much of the functionality encapsulated in macros and templates.
Once SystemBuilder creates the project, the system interfaces and program logic
can be customized in SystemBuilder or can be easily modified with Crestron
development tools (i.e., SIMPL Windows and Crestron VisionTools
Pro-e) software packages).
SystemBuilder comes with templates for all supported interfaces. If a user
wishes to create a touchpanel project using templates with a different look-and-
feel, this can be accomplished by making a custom template. This custom
template can then be used by SystemBuilder to create the final project files to be
loaded into the panels. Alternatively, VT Pro-e can be used to tweak projects
created with the SystemBuilder or develop original touchpanel screen designs.
Once the program created by SystemBuilder is loaded into the control system,
Digital Media Tools (DMT) Software can be used to tune the system for optimal
performance. DMT software can be used to test the quality of audio and video
signals as well as fine-tune audio and video settings.
Crestron QM-FTSC
Shield
Ground terminal
to Earth Ground
Operations & Installation Guide - DOC. 6269
QM-FTSC
®
Pro-e (VT
Advertisement
Table of Contents
