Installation - Crestron QM-FTMCSC Operation And Installation Manual

Crestron QM-FTMCSC
Operations & Installation Guide – DOC. 6307A
FlipTop Media Center with Storage Compartment
Network Device Tree
4. Right-click on the device Net ID, and when the sub-menu appears,
select Change Network ID from the sub-menu.
Network Device Tree – Sub-Menu
5. Enter a new Net ID and press Enter.
Enter New Net ID
Repeat this procedure for each additional network device requiring a Net ID
change.

Installation

NOTE: This section does not apply to NB models.
The QM-FTMCSC is shipped with ten large blank buttons. You can order a
variety of button kits (sold separately) to add as many as 20 engraved or blank
buttons.
Button Kits
KIT NUMBER
FT-BTNB-L
FT-BTNB-L-BLANK
FT-BTNB-S
FT-BTNB-S-BLANK
FlipTop Media Center with Storage Compartment: QM-FTMCSC • 17
DESCRIPTION
One large button engraved as desired
One large button not engraved
Two small buttons with divider engraved as desired
Two small buttons with divider, not engraved