Table of Contents
Advertisement
Crestron QM-FTSC
Operations & Installation Guide – DOC. 6269
Mounting to Surface
The QM-FTSC is designed to mount in a horizontal surface, such as a desk top,
lectern, or podium. The following diagram illustrates the required opening size
to accommodate the QM-FTSC.
Mounting Hole Dimensions
7.88 in
(20.00 cm)
5.88 in
(14.92 cm)
(0.318 cm)
NOTE: Before inserting the QM-FTSC in the mounting hole, ensure that all
required cables have been installed.
1. Install the eight supplied #6-32 screws, but do not tighten (four on the
front side and four on the rear side). These will be used to secure the
front and rear mounting brackets.
2. Position the QM-FTSC in the mounting hole.
Mounting Bracket Screw Locations
#6-32 Screws
Surface
Cutout
FlipTop Storage Center
Radius
0.125 in
FlipTop Storage Center: QM-FTSC • 17
NOTE
Connectors on right side.
Use care when mounting
through opening.
#6-32 Screws
Advertisement
Table of Contents
