Crestron QM-FTSC
Problem Solving
Operations & Installation Guide – DOC. 6269
"Select Network ID" Window
NOTE: When transferring a Cresnet file (touchpanel project/ firmware), lower
the port speed baud rate to 38400 to match the Cresnet bus speed.
"Open" Window
NOTE: Firmware upgrades to the button panel include two files, [filename]a.csf
and [filename]b.csf. Select the 'a' file to begin the upload; the 'b' file is loaded
automatically.
4. Browse to the desired [filename]a.csf file and click Open to begin the
transfer. The program automatically sends the 'a' file and then the 'b' file.
The following table provides corrective action for possible trouble situations. If
further assistance is required, please contact a Crestron customer service
representative.
FlipTop Storage Center
FlipTop Storage Center: QM-FTSC • 41