Table of Contents
Advertisement
Crestron QM-FTSC
System View of QM-RMCRX
Operations & Installation Guide – DOC. 6269
C2Net-Device Slot in Configuration Manager
The C2Net-Device slot (05) enables the QM-RMCRX to control up to 252
Cresnet devices. Each Cresnet device is assigned a unique identifier called a Net
ID, which is a hexadecimal value ranging from 03 to FE.
To view the list of supported devices, expand the control system in the bottom
pane of System Views and double-click the C2Net-Device slot, the desired Net
ID, or right-click and select Add Item from the submenu. Then select the device
you want to add. Alternatively, you can drag the device from the Cresnet
Control Modules folder onto the Net ID. Supported devices include network
control modules, lighting modules and a variety of Crestron wired touchpanels.
In Program Manager, the C2Net-Device symbol contains no signals; to program
a controlled Cresnet device, expand C2Net-Device in Program View. Then drag
the device to Detail View.
In the Cresnet Control Modules, locate the QM-FTSC.
QM-FTSC Control Module
Within this module are three symbols. The QM-WMC and QM-MIC are
grouped together and share a common Net ID (04 default). The keypad symbol
has its own Net ID (73 default). Drag and drop the QM-FTSC module onto the
C2Net-Device slot.
FlipTop Storage Center
FlipTop Storage Center: QM-FTSC • 25
Advertisement
Table of Contents
