Crestron iLux CLS-C6 Operation Manual page 6

™
iLux Lighting System
• iLux
™
2
Lighting System: CLS/CLSI-C6 & CLS/CLSI-C6M
Crestron CLS/CLSI-C6 & CLS/CLSI-C6M
Six Group Shade Control
Using Crestron's networked shade and drape controllers (sold separately), the
CLS-C6 enables versatile control of a roomful of motorized window treatments,
screens, and lifts in up to six shade groups. Each controller is connected to the
CLS-C6 via the four-wire Cresnet bus.
Versatile Front Panel Controls
The deceptively clean front panel actually affords an extensive amount of control
and customization to suit each unique room application. Large ON and OFF buttons
provide instant access to the "On" and "All Off" scenes, while the six main buttons
can be set up to recall additional scene presets, adjust shades, or perform a host of
other functions. The buttons' "rocker" action enables intuitive control for adjusting
lighting levels and shade positions. An additional "Up/Down" button is configurable
for a variety of functions, including use as a master lighting or shade control, or as a
"shift" button to expand the capabilities of the six main buttons.
With each new scene selection, window shades reposition and lights fade elegantly
to their new settings. The selected scene is indicated by a white LED beside each
button, and the customizable label strip allows each button to be clearly labeled
using Crestron Engraver software. Dimming levels and shade positions are displayed
graphically on six green LED bargraphs accessible behind the flip-up front cover.
Additional controls and a numeric display hidden beneath the cover enable setup
without requiring a PC. Enhanced customization is provided via the PC
programming port using iLux Designer software.
Built-in Motion Detector (CLS/CLSI-C6M)
The CLS/CLSI-C6M model provides the addition of a built-in infrared motion
detector, enabling automated control based on room occupancy. Lights can be
programmed to turn on and shades open automatically when someone enters the
room, or turn off and close when the room is left empty. Remote motion detectors
are also available to expand the coverage of the CLS/CLSI-C6M, or add occupancy
sensing capability to the CLS-C6 units.
IR Remote Control
The CLS-C6 units are equipped with an onboard IR receiver to allow for wireless
remote control using Crestron's optional infrared remote control (sold separately).
Multipoint Keypad Control
Up to 16 Crestron keypads (sold separately) may be connected to a single CLS-C6,
providing versatile multipoint control for rooms with several entrances or work
areas.
Multi-Unit Expansion
A single CLS-C6 master will support up to eight additional CLS-C6s, enabling
systems of up to 54 lighting channels and 54 shade groups. Scene recall, master
dimming, and occupancy status are shared between all the CLS-C6 units. Each
individual unit can still support a complete assortment of local devices including
keypads, shade controllers, and sensors.
Operations Guide - DOC. 6347B