Console Command Settings - Crestron iLux CLS-C6 Operation Manual

Crestron CLS/CLSI-C6 & CLS/CLSI-C6M
Operations Guide - DOC. 6347B
NOTE: In systems with multiple CLS-C6 units that have the motion sensor function
enabled, it is important to set the motion sensor timeout of each unit to the same
value.
Keypads
The Keypads screen allows you to add up to 16 remote keypads; specify the remote
keypad type; define the action type, action, and target of each button on that keypad.
You can also launch the Crestron Engraver to create an engraver project for each
remote keypad.
NOTE: All keypads defined in the project must be installed and present on the
CLS-C6 network before setting Network IDs via the Finish screen.
Finish
The Finish screen allows you to send your iLux Designer project to the CLS-C6; set
the Net IDs for network devices; retrieve configuration information from the current
CLS-C6 module; and print reports that give the spreadsheet data from each of the
configuration screens.

Console Command Settings

Enabling/disabling IR reception, resetting the brightness level for the white and
green LEDs, and resetting the Glow mode level can be done only via console
commands.
By default, IR reception is enabled, the white and green LED brightness levels are
set to 70 and 63, respectively, and the white LED Glow mode level is set to 7. If the
settings are acceptable, continue with the configuring procedures. If these settings
are not satisfactory, open the Crestron Toolbox and click Tools | Text Console to
display the "Text Console" window, and follow the instructions given below.
IR Reception
1. At the iLux> prompt, type <IR> and press Return to display the current
setting. The system displays:
IR reception is enabled (or disabled)
iLux>
2. To disable IR reception, type <IR disable> and press Return. The system
displays:
IR reception is disabled
iLux>
3. To enable IR reception, type <IR enable> and press Return. The system
displays:
IR reception is enabled
iLux>
LED Brightness
These settings are for the white LEDs next to the function buttons and the ON
button, the shift LEDs, and the green bargraph LEDs.
™
iLux
™
iLux
Lighting System: CLS/CLSI-C6 & CLS/CLSI-C6M • 23
Lighting System