Crestron CLS/CLSI-C6 & CLS/CLSI-C6M
Configuration Manager
Operations Guide - DOC. 6347B
Programming with SIMPL Windows
NOTE: While SIMPL Windows can be used to program a system that includes a
CLS-C6, it is recommended to use SystemBuilder for configuring a Crestron control
system.
SIMPL Windows is Crestron's premier software for programming Crestron control
systems. It is organized into two separate, but equally important "Managers".
Configuration Manager is the view where programmers "build" a Crestron control
system by selecting hardware from the Device Library.
•
To incorporate the CLS-C6 into the system, drag the CLS-C6/CLS-C6M
from the Lighting folder of the Device Library and drop it in the System
Views.
Locating the CLS-C6 in the Device Library
•
The system tree of the control system displays the device in the appropriate
slot with a default Net ID as shown in the following illustration.
C2Net Device, Slot 9
•
Additional CLS-C6 devices are assigned different Net ID numbers as they
are added.
•
If necessary, double click a device to open the "Device Settings" window
and change the Net ID, as shown in the following figure.
™
iLux
™
iLux
Lighting System: CLS/CLSI-C6 & CLS/CLSI-C6M • 27
Lighting System