Crestron CS-SHADE-ROLLER-BATT Product Manual
  1. Manuals
  2. Brands
  3. Crestron Manuals
  4. Indoor Furnishing
  5. CS-SHADE-ROLLER-BATT
  6. Product manual

Crestron CS-SHADE-ROLLER-BATT Product Manual

Battery powered shades
Hide thumbs Also See for CS-SHADE-ROLLER-BATT:
Table of Contents

Advertisement

Quick Links

Download this manual
CS-SHADE-ROLLER-BATT
Crestron® Battery Powered Shades
Product Manual
Crestron Electronics, Inc.

Advertisement

Table of Contents
loading

Related Manuals for Crestron CS-SHADE-ROLLER-BATT

Summary of Contents for Crestron CS-SHADE-ROLLER-BATT

  • Page 1 CS-SHADE-ROLLER-BATT Crestron® Battery Powered Shades Product Manual Crestron Electronics, Inc.
  • Page 2 The U.S. English version of this document is the original instructions. All other languages are a translation of the original instructions. Crestron product development software is licensed to Crestron dealers and Crestron Service Providers (CSPs) under a limited nonexclusive, nontransferable Software Development Tools License Agreement. Crestron product operating system software is licensed to Crestron dealers, CSPs, and end-users under a separate End-User License Agreement.

  • Page 3: Table Of Contents

    QMT®3 Series Architectural or Décor Mounting Hardware Easy Manual-to-Motorized Shade Upgrade Natural and Artificial Daylight Control Security and Privacy Quiet Shade Motors Brushless Motor Technology Easy Installation Crestron Design Tool Shades (CDTS) Software Physical Description Specifications CS-SHADE-ROLLER-BATT CSM(I)-QMTDC-163-1-SG Installation Mount the Shade Brackets...
  • Page 4 Test and Adjust Shade Limits Test the Shade Travel Adjust the Shade Limits Wireless Communications Join a Wireless Network Leave a Wireless Network Verifying Communications Status Operation Controls and Indicators LEDs Troubleshooting Trouble Situation Error State iv • Contents Product Manual — Doc. 9206A...
  • Page 5 v • Contents Product Manual — Doc. 9206A...

  • Page 6: Overview

    Use the CSM-QMTDC-163-1-SG shade motor for an easy manual-to-motorized shade upgrade using existing hardware Designed for use with Crestron® QMT®3 Series Architectural or QMT3 Series Décor shade hardware For roller shades 22 to 96 in. (559 to 2,439 mm) wide using Décor shade hardware For roller shades 24 to 96 in.

  • Page 7: Long-Life Battery Operation

    Décor (CSS-DECOR3) mounting hardware. QMT3 series mounting hardware is a compact mounting system that allows a Crestron shade to be mounted on a wall, ceiling, or window jamb. The CSA-ARCH3 fascia for battery-operated shades includes an integrated battery holder that neatly stores the battery compartment.

  • Page 8: Brushless Motor Technology

    It provides superior torque in a small package. Easy Installation Crestron shades are easy to install. Brackets are easily mounted, and the motor clicks into place with no special tools required. Crestron Design Tool Shades (CDTS) Software...

  • Page 9: Specifications

    Specifications This section provides the following information: •   CS-SHADE-ROLLER-BATT •   CSM(I)-QMTDC-163-1-SG 9 • CS-SHADE-ROLLER-BATT Product Manual — Doc. 9206A...

  • Page 10: Cs-Shade-Roller-Batt

    CS-SHADE-ROLLER-BATT Specifications for the CS-SHADE-ROLLER-BATT are below. Shade Motor CSM-QMTDC-163-1-SG For details, refer to the CSM-QMTDC-163-1-SG product page. CSMI-QMTDC-163-1-SG For details, refer to the CSMI-QMTDC-163-1-SG product page. Shade Brackets CSS-ARCH3 For details, refer to the CSS-ARCH3 product page. CSS-DECOR3 For details, refer to the CSS-DECOR3 product page.

  • Page 11: Csm(I)-Qmtdc-163-1-Sg

    IEEE 802.15.4 compliant Range (Typical) 230 ft (70 m) indoor, to SG wireless gateway; Subject to site-specific conditions and individual device capabilities Gateway Requires a Universal Wireless Gateway (CEN-GW1 or CENI-GW1, sold separately) 11 • CS-SHADE-ROLLER-BATT Product Manual — Doc. 9206A...
  • Page 12 1. Battery-powered shade motors cannot be used with roman shades, horizontal sheers, dual-roll brackets, couplers, and pockets. 2. Estimated battery life is based on two open/close cycles per day. High environmental temperatures and shades taller than 60 in. (1524 mm) can reduce the battery life. Product Manual — Doc. 9206A CS-SHADE-ROLLER-BATT • 12...

  • Page 13: Installation

    Mount the Shade Assembly •   Mount Battery Pack and Insert Batteries •   Level and Center the Shade Assembly •   Motor Wiring •   Replace a Motor •   Convert a Manual Shade to a Motorized Shade 13 • CS-SHADE-ROLLER-BATT Product Manual — Doc. 9206A...

  • Page 14: Mount The Shade Brackets

    Mount the Shade Brackets The CS-SHADE-ROLLER-BATT is compatible with CSA-ARCH3 and CSA-DECOR3 mounting brackets. CSA-ARCH3 Brackets To mount the brackets: 1. Check for a proper fit by holding the roller shade assembly in the approximate mounting location. Use the fascia to measure the proper distance between mounting brackets. The brackets should be mounted flush with the end of the fascia.
  • Page 15 The stamped L and R on the bracket should face the wall and window. For inside mounts, secure the mounting brackets into the window jamb or the window header. Outside Mount (CSA-ARCH3-BRKT) Inside Mount (CSA-ARCH3-BRKT) 15 • CS-SHADE-ROLLER-BATT Product Manual — Doc. 9206A...

  • Page 16: Csa-Decor3 Brackets

    3. If applicable, attach the end caps to the mounting brackets. Attach the end cap marked LEFT to the motor bracket (stamped with an L) and the end cap marked RIGHT to the idler bracket (stamped with an R). The end caps snap into place. Product Manual — Doc. 9206A CS-SHADE-ROLLER-BATT • 16...
  • Page 17 The stamped L and R on the bracket should face the wall and window. For inside mounts, secure the mounting brackets into the window jamb or the window header. Outside Mount Inside Mount 17 • CS-SHADE-ROLLER-BATT Product Manual — Doc. 9206A...
  • Page 18 2. Reassemble the idler mount and the bracket so that the keyhole is parallel to the wall when the bracket is mounted. The screw head on the vertical adjustment screw must face down. 3. Secure the idler mount with the screws removed in step 1. Product Manual — Doc. 9206A CS-SHADE-ROLLER-BATT • 18...

  • Page 19: Mount The Shade Assembly

    The idler pin sits on the vertical adjustment screw. Insert the Idler Pin into the Keyhole (CSA-ARCH3-BRKT) 2. Raise the motor end of the roller shade assembly to the motor bracket. 19 • CS-SHADE-ROLLER-BATT Product Manual — Doc. 9206A...

  • Page 20: Csa-Decor3 Brackets

    The idler pin sits on the vertical adjustment screw. Insert the Idler Pin into the Keyhole 2. Raise the motor end of the roller shade assembly to the motor bracket. Product Manual — Doc. 9206A CS-SHADE-ROLLER-BATT • 20...
  • Page 21 Make sure that the shade is properly mounted before letting go. Secure the Motor to the Motor Bracket 21 • CS-SHADE-ROLLER-BATT Product Manual — Doc. 9206A...

  • Page 22: Mount Battery Pack And Insert Batteries

    Mount Battery Pack and Insert Batteries The CS-SHADE-ROLLER-BATT is compatible with CSA-ARCH3 and CSA-DECOR3 mounting brackets. CAUTION: Removing the batteries or disconnecting the battery-pack cable from the motor during motor operation may result in lost shade limits. To reset the shade limits, refer to...
  • Page 23 CAUTION: Removing the batteries or disconnecting the battery-pack cable from the motor during motor operation may result in lost shade limits. To reset the shade limits, refer to Test and Adjust Shade Limits (on page 37). 23 • CS-SHADE-ROLLER-BATT Product Manual — Doc. 9206A...
  • Page 24 5. Insert 8 D-cell batteries into the battery pack. Follow the markings on the battery pack to ensure proper orientation. NOTE: Make sure that the batteries are inserted in the proper orientation. Product Manual — Doc. 9206A CS-SHADE-ROLLER-BATT • 24...
  • Page 25 7. Rotate the battery pack into the fascia until the battery pack clicks into the fully closed position. 8. Connect the motor cable to the battery-pack cable on the connector bracket. 25 • CS-SHADE-ROLLER-BATT Product Manual — Doc. 9206A...

  • Page 26: Csa-Decor3 Brackets

    NOTE: Make sure that the batteries are inserted in the proper orientation. 5. Replace the positive end of the battery pack. To replace, twist the cap clockwise. 6. Connect the battery-pack cable to the motor. Product Manual — Doc. 9206A CS-SHADE-ROLLER-BATT • 26...
  • Page 27 To mount the battery pack: 1. Secure the mounting bracket to the wall or window jamb using appropriate mounting hardware (not supplied). The motor side of the bracket must be mounted closest to the motor. 27 • CS-SHADE-ROLLER-BATT Product Manual — Doc. 9206A...
  • Page 28 2. The mounting bracket has two clips that hold the battery pack in place. Slide the battery pack onto the clips until it clicks into place. 3. Connect the battery-pack cable to the motor. Product Manual — Doc. 9206A CS-SHADE-ROLLER-BATT • 28...
  • Page 29 To remove the decorative cover, squeeze the decorative cover near the end where the motor exits and then pull the cover away from the mounting bracket. 29 • CS-SHADE-ROLLER-BATT Product Manual — Doc. 9206A...

  • Page 30: Level And Center The Shade Assembly

    Remount the bracket to level the shade. To level and center the shade assembly, use the adjustment features built into the shade bracket. Adjust the CSA-ARCH3 Bracket Adjust the CSA-DECOR3 Bracket Product Manual — Doc. 9206A CS-SHADE-ROLLER-BATT • 30...
  • Page 31 Fabric is telescoping to the left: Place the tape on the right side of the tube. Fabric is telescoping to the right: Place the tape on the left side of the tube. 31 • CS-SHADE-ROLLER-BATT Product Manual — Doc. 9206A...

  • Page 32: Motor Wiring

    Use cable ties to secure the cables to the loop on the bracket. Ensure that the cables and connectors do not make contact with the shade fabric. Making the Connections Wire the SG Wireless QMT® Shade Motor Product Manual — Doc. 9206A CS-SHADE-ROLLER-BATT • 32...

  • Page 33: Replace A Motor

    Replace a Motor The Crestron® CSM(I)-QMTDC-163-SG series QMT® shade motors can be easily removed and replaced. CAUTION: Roll up the shade fabric to prevent damage during this procedure. NOTES: A soft and clean work surface is required to perform this procedure.

  • Page 34: Replace The Motor

    Installation is the opposite of removal. For details, refer to SHADE-ROLLER-BATT Installation. NOTE: Limits need to be set after installation. Refer to Replace a Motor (on the previous page) for details. Product Manual — Doc. 9206A CS-SHADE-ROLLER-BATT • 34...

  • Page 35: Convert A Manual Shade To A Motorized Shade

    Convert a Manual Shade to a Motorized Shade The Crestron® CS-SHADE-ROLLER-MANUAL-BATTERY-UPGRD is an upgrade kit that converts a manual clutch shade to a motorized shade using a QMT® shade motor. Remove the Roller Shade Assembly CAUTION: Roll up the shade fabric to prevent damage during this procedure.

  • Page 36: Replace The Fascia Mount (Optional)

    1. Remove the two screws that secure the fascia mount to the bracket and then, remove the fascia mount. 2. Install the new fascia mount with the two screws that were removed in step 1. 3. Repeat steps 1 and 2 for the other bracket. Product Manual — Doc. 9206A CS-SHADE-ROLLER-BATT • 36...

  • Page 37: Configuration

    Configuration Prior to configuration, ensure the device is running the latest firmware. To update the firmware, use the Crestron Toolbox™ application. Program the QMT® shade motor using the buttons on the motor. NOTE: The procedures described in this document can also be performed remotely using a control system.

  • Page 38: Adjust The Shade Limits

    5. If the lower limit is not set, the motor automatically enters Limit Setup mode for the lower limit. To set the lower limit, refer to step 3 in the procedure above. Product Manual — Doc. 9206A CS-SHADE-ROLLER-BATT • 38...

  • Page 39: Wireless Communications

    Join a Wireless Network To join a wireless network: NOTE: A device can be acquired by only one gateway. 1. Put the gateway into Acquire mode from the unit itself, the Web UI, Crestron Home™ Setup app, or from Crestron Toolbox. NOTES: If the gateway is part of a Crestron Home™...
  • Page 40 The LED flashes quickly to show that the device did not join the wireless network. Press the SET button to turn off the LED. Ensure the gateway is in Acquire mode and within range before attempting the acquire process again. Product Manual — Doc. 9206A CS-SHADE-ROLLER-BATT • 40...

  • Page 41: Leave A Wireless Network

    Flashes twice The device was previously joined to the network but is not communicating with the gateway. Flashes once The device is not joined to the network. 41 • CS-SHADE-ROLLER-BATT Product Manual — Doc. 9206A...

  • Page 42: Operation

    LEDs Controls and Indicators The Crestron CSM(I)-QMTDC shade motors have UP, SET, and DN (down) push buttons that are used to program the shade. The shade motors have a multicolor LED that lights red, amber, green, blue, or white to provide confirmation, operating mode, and error state feedback. The UP button is located closest to the LED, the SET button is the second button from the LED, and...
  • Page 43 The motor is in Identify mode. 1/4-second off) Slow flash (1/2-second on, Green The motor is moving from a local button press. 1/2-second off) Solid Green The motor is communicating with the control system program. 43 • CS-SHADE-ROLLER-BATT Product Manual — Doc. 9206A...

  • Page 44: Troubleshooting

    Trouble Situation The following table provides corrective action for possible trouble situations. If further assistance is required, please contact Crestron Support. Crestron CSM(I)-QMTDC Motor Troubleshooting Trouble Possible Cause(s) Action The motor cannot There is no power provided to Check the power connections between the be controlled and the motor.

  • Page 45: Error State

    Error State Crestron CSM(I)-QMTDC motors display error codes using the red LED on the interface. The LED flashes a pattern to indicate the error. NOTE: The error code does not flash while the motor is in a sleep state. If the error state is still active when the motor wakes up, the LED will continue to flash the code.
  • Page 46 This page is intentionally left blank. Product Manual — Doc. 9206A CS-SHADE-ROLLER-BATT • 46...
  • Page 47 Product Manual — Doc. 9206A Crestron Electronics, Inc. (2047154) 15 Volvo Drive, Rockleigh, NJ 07647 12/23/21 Tel: 888.CRESTRON Specifications subject to Fax: 201.767.7656 change without notice. www.crestron.com...

Table of Contents