Specifications; Physical Description - Crestron iLux CLS-C6 Operation Manual

™
iLux Lighting System
• iLux
™
4
Lighting System: CLS/CLSI-C6 & CLS/CLSI-C6M
Crestron CLS/CLSI-C6 & CLS/CLSI-C6M

Specifications

The following table provides specifications for the CLS-C6.
CLS-C6 Specifications
SPECIFICATION
Load Ratings
CLS-C6/C6M
Max load per channel :
Min load per channel
Max load per unit:
CLSI-C6/C6M
Max load per channel :
Min load per channel
Max load per unit:
Power Requirements
Default Net ID
Control System Update Files
Minimum 2-Series Control
System
Load Types
IR Receiver
Reception Frequency
Motion Detector
(CLS/CLSI-C6M only
Type
Range
Firmware
Environmental Temperature
Humidity
Overall Dimensions:
Height
Width
Depth
Weight
1. The latest versions can be obtained from the Crestron website. Refer to NOTE after last footnote.
2. Crestron 2-Series control systems include the AV2 and PRO2. Consult the latest Crestron Product
Catalog for a complete list of 2-Series control systems.
3. These loads require an optional booster module. The modules are LEPB-n, where 'n' is a number based
on the desired load type. Also, some boosters permit control of 277VAC loads. Refer to the Crestron
website for details on power boosters.
NOTE: Crestron software and any files on the website are for Authorized Crestron
dealers and Crestron Authorized Independent Programmers (CAIP) only. New users may
be required to register to obtain access to certain areas of the site (including the FTP site).

Physical Description

All controls and indicators for the CLS-C6 are located on the front of the unit. The
front panel also contains a mini phone jack, under the flip-up cover, used for
programming functions, and an IR port for control via an IR remote device. All other
800 W/VA (6.7 Amps @ 120 VAC)
15 W/VA (0.125 Amps @ 120 VAC)
1920 W/VA (16 Amps @ 120 VAC)
800 W/VA (3.5 Amps @ 230 VAC)
25 W/VA (0.108 Amps @ 230 VAC)
2300 W/VA (10 Amps @ 230 VAC)
CLS-C6 Line Power, 100 –127 VAC, 50 / 60Hz
CLSI-C6 Line Power, 220 – 240 VAC, 50 / 60Hz
1F
1, 2
Version 2.004.CUZ or later
Incandescent, magnetic low voltage, neon/cold
cathode, dimmable 2-wire fluorescent, and non-dim
lighting (also: electronic low voltage, 3-wire and
3
4-wire fluorescent
36 kHz
Requires Crestron IR remote (sold separately).
Infrared
20 to 30 feet at 4-foot elevation
(6 to 9 meters at 1.2 meter elevation)
clsi-c6_clsi-c6m_1.01.02.upg or later
32° to 104°F (0° to 40°C)
10% to 90% RH (non-condensing)
4.48 in (11.38 cm)
8.89 in (22.58 cm)
2.46 in (6.25 cm) for CLS/CLSI-C6
2.59 in (6.58 cm) for CLS/CLSI-C6M
1.43 lbs (0.65 kg)
Operations Guide - DOC. 6347B
DETAILS
)