Filament Won't Load - Snapmaker 2.0 Troubleshooting Manual

Hardware
Filament Won't Load
Possible Causes
• The nozzle is jammed.
• The filament is bent or compromised.
• The 3D Printing Module or Controller is broken.
Actions
1. Replace the hot end. A spare hot end is included in the box. For how to change the hot end,
see https://drive.google.com/file/d/16lLntfp-3V-j48pP_-aeRtADg49mSnek/view.
2. Straighten the filament before you insert it into the Printing Module. Or try a different filament. If this does not
solve the problem, then the toolhead or the Controller might be broken. Go to the next step.
3. Turn on the machine, and press to open the latch on the 3D Printing Module.
|
14
Possible Causes
• The filament switch is broken.
Actions
1. Remove the fan: https://youtu.be/e2L_Y_HZGgA.
2. Adjust the filament switch: https://youtu.be/_KAQvMNoJUQ.