Table of Contents
Advertisement
Hardware
3. Fix the end-stop switch on your TRIGGERED Linear Module.
3.1 Disassemble the cover (the one with no cable end) of the Linear Module. You will need the 2.5 & 2.0 hex
screwdriver.
3.2 Find the end-stop switch. Check if it's stuck.
3.3 Tap the end-stop switch and re-assemble the Linear Module.
4. Check if the Linear Module works. If not, replacing the Linear Module might solve the problem.
Slider (Carriage) of Linear Module Comes Loose
Actions
1. Take the cover (the one with no cable attached) off from the Linear Module. You will need the 2.5 & 2.0 hex
screwdriver.
|
06
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 2.0 and is the answer not in the manual?
Questions and answers