Front fork adjustment
This front fork is equipped with spring
preload and damping force adjusters.
WARNING
@
Each fork leg must be set to the
same pressure. Uneven setting can
cause poor handling and loss of sta-
bility.
@
INSTRUMENT AND CONTROL FUNCTIONS
EAU01862*
EW000037
1. Spring preload adjusting bolt
Adjusting spring preload
Turn the adjusting bolt in direction a
to increase spring preload and in di-
rection b to decrease spring preload.
Align the preferred setting with the top
of the front fork cap bolt.
CAUTION:
@
The grooves are provided to show
the adjustment level. Always keep
the adjustment level equal on both
fork legs.
@
1. Setting
2. Front fork cap bolt
CI-18E
Adjusting
position
EC000013
3-16
Stan-
Hard
Soft
dard
1
2
3
4
5
6
7
3
8