Headlight Beam Adjustment - Yamaha DT200L 1984-1988 Service Manual

INSP
ADJ
HEADLIGHT BEAM ADJUSTMENT/FUSE INSPECTION
luminous flux will be adversely affected. If
oil gets on the bulb, throughly clean it with
a cloth moistened with alcohol or lacquer
thinner.
6. Connect/lnstall:
• Components in above list (Steps "3, 2,
1".)
7. Adjust:
• Headlight beam
Headlight Beam Adjustment
1. Adjust
• Headlight beam (Horizontally)
Right
Left
Horizontal Adjustment
Turn the adjusting screw (D
counterclockwise.
Turn the adjusting screw (1)
clockwise.
2. Adjust:
• Headlight beam (Vertically)
Higher
Lower
Vertical Adjustment
Turn the adjusting screw 1
clockwise.
Turn the adjusting screw
counterclockwise.
Fuse Inspection
1. Inspect:
• Fused)
Defective -* Replace.
Blow fuse (New) - Inspect circuit.
(2) Spare fuse
Do not use fuses of higher amperage rating
than those recommended.
Substitution of a fuse of improper rating can
cause extensive electrical system damage
and possibly a fire.
Description
Main
Reserve
Amperage
10A
10A
Quantity
1
1
2-35