Table of Contents
Advertisement
E30A Emulator User's Manual
Warnings for AC Power Supply:
If the included AC power cable does not fit the receptacle, do not alter the AC power cable and do not
plug it forcibly. Failure to comply may cause electric shock and/or fire.
The included AC power cable complies with American UL Standard. Use an AC power cable which
complies with the safety standard of the country where this emulator is used.
The rated voltage for this cable is 125 volts. When you connect to a power supply of more than 125V,
use an appropriate cable for the voltage.
Do not touch the plug of the AC power cable when your hands are wet. This may cause electric shock.
This emulator is connected signal ground with frame ground. If your developing product is transform-
less (not having isolation transformer of AC power), this may cause electric shock. Also, this may give
an un-repairable damage to this emulator and your developing product.
While developing, connect AC power of the product to commercial power through isolation transformer
in order to avoid these dangers.
If other equipment is connected to the same branch circuit, care should be taken not to overload the
circuit.
When installing this equipment, insure that a reliable ground connection is maintained.
If you smell a strange odor, hear an unusual sound, or see smoke coming from this product, then
disconnect power immediately by unplugging the AC power cable from the outlet.
Do not use this as it is because of the danger of electric shock and/or fire. In this case, contact your
local distributor.
Before setting up this emulator and connecting it to other devices, turn off power or remove a power
cable to prevent injury or product damage.
Warning for Modification:
Do not modify this emulator. Personal injury due to electric shock may occur if this emulator is modified.
Modifying the emulator will void your warranty.
Warnings for Installation:
Do not set this product in water or areas of high humidity. Make sure that the product does not get wet.
Spilling water or some other liquid into the product may cause un-repairable damage.
Make sure nothing falls into the cooling fan on the top panel, especially liquids, metal objects, or
anything combustible.
Warning for Use temperature:
This equipment is to be used in an environment with a maximum ambient temperature of 35°C. Care
should be taken that this temperature is not exceeded.
R20UT0422EJ0501 Rev.5.01
Mar 15, 2016
WARNING
Precautions for Safety
Page 7 of 65
Advertisement
Table of Contents
