Renesas R0E00030AKCT00 User Manual page 43

E30A Emulator User's Manual 3. Starting Up the Emulator Debugger
3.5.3 Ext Port Tab
This tab permits you to set the extension port function to connect an option connector.
(1) Setting Extension Port
Specify whether to disable the reset signal for the user system. Unless the option board is connected, this setting is not
available to use. When this check box is selected, a high output to RSTMSK is generated to disable reset of the user system.
For details, refer to "2.6.3 Using the Option Board R0E00030ACKZ10".
R20UT0422EJ0501 Rev.5.01 Page 43 of 65
Mar 15, 2016