Appendix E Signal Assignments Of The Connectors - Renesas R0E00030AKCT00 User Manual

E30A Emulator User's Manual

Appendix E Signal Assignments of the Connectors

(1) USB I/F connector
Table E.1 lists the signal assignments of the USB I/F connector.
Table E.1 Signal assignments of the USB I/F connector
No. Signal
1 VBUS 5.0 V power supply, unused
2 D-
3 D+
4 NC Unused
5 GND
(2) Oscillator circuit board connector
Table E.2 lists the signal assignments of the oscillator circuit board connector.
Table E.2 Signal assignments of the oscillator circuit board connector
No. Signal
J1-1 V50 5.0 V power supply
J1-2 GND
J1-3 OSCCLK Oscillator circuit input (amplitude: 5.0 V)
J1-4 GND
(3) Option connector
Table E.3 lists the signal assignments of the option connector.
Table E.3 Signal assignments of the option connector
No. Signal
1 UVcc1 Vcc1 power supply
2 UVcc1 Vcc1 power supply
3 GND
4 RST# Reset signal
5 GND
6 RSTMSK Reset mask signal
7 GND
8 UVcc2 Vcc2 power supply
9 UVcc1 Vcc1 power supply
10 UCON# Connected to GND
R20UT0422EJ0501 Rev.5.01
Mar 15, 2016
Description
Description
Description
Appendix E Signal Assignments of the Connectors
Page 59 of 65