Table of Contents
Advertisement
E30A Emulator User's Manual
2.8 Installing the USB Device Driver
The installation wizard for USB device drivers starts after the device had been detected by the host machine.
Figure 2.7 shows the procedure for installing the USB device drivers for Window
installed automatically.
Figure 2.7 Installation of USB device driver for Windows
Note on USB Port Change:
If you change the port to connect USB, the device driver is installed over again.
Note on Found New Hardware Wizard:
For Windows
of the host machine. For example, approximately 9 seconds of time is needed when the CPU usage
rate is 0%, whereas approximately 30 seconds is needed when the CPU usage rate is 100%.
R20UT0422EJ0501 Rev.5.01
Mar 15, 2016
®
XP, the amount of time needed for the wizard to appear depends on the CPU usage rate
®
XP. For other OS, the driver will be
Select "No, not this time" and click "Next".
Click "Next".
The USB driver will be installed automatically.
Click "Finish" to exit.
®
XP
2. Setup
Page 29 of 65
Advertisement
Table of Contents
