Table of Contents
Advertisement
E30A Emulator User's Manual
1.5 Specifications
1.5.1 Product specifications
Table 1.2 lists the product specifications of the E30A emulator.
Table 1.2 Product specifications of the E30A emulator
Item
Applicable MCU
Available MCU mode
Maximum operating frequency
Emulation memory
Software break
Execution address break
Hardware break
Combinatorial break point
Trace mode
Trace capacity
Trace contents
Trace event
Time measurement
RAM monitor
Coverage
Simultaneously usable functions
by operation mode
Trace: Trace priority
Trace: MCU execution priority
Time Measurement
RAM Monitor
Host machine I/F
Target I/F
Target I/F signal
Targetless debugging
Emulator power supply
Target MCU power supply
Outside dimension
Weight
Operating environment
Storage environment
Overseas standard
R20UT0422EJ0501 Rev.5.01
Mar 15, 2016
M16C Family R32C/100 Series
Single-chip mode
Memory expansion mode
100MHz (CPU clock)
Not available (internal flash ROM used as emulation memory)
Maximum 256 points (implemented by instruction replacement)
Maximum 8 points (execution address/data access)
- Shared with trace event/time measurement event
- Only address and R/W attribute specifiable for data access break
- One data comparison breakpoint specifiable in software
OR/status transition (in forward direction)
Trace priority/MCU execution priority specifiable
8M events (Trace priority) /512 events (MCU execution priority)
Branch source and branch destination/conditional branch/data access
Maximum 8 points/4 area (prefetch address/data access)
- Shared with break event/time measurement event
- Start/end/extraction event specifiable
Execution time (between Go-Stop, 32-bit CPU clock counter in MCU)
Section time, 3 points (between data access, 40-bit counter in E30A)
Specifiable in byte or word units
- pseudo-RAM monitor realized by software (one event used)
Not available
Execution
Data
Address
Access
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Writer
-
USB 2.0 (High Speed)
2-pin (50Ω coaxial cable)
3-pin (via coaxial converter board)
8-pin (via option board)
NSD, GND (When using coaxial cable/coaxial converter board)
NSD, GND, Vcc1, Vcc2, RESET# (When using option board)
Not available
Supplied from the included AC adapter
Supplied from a user system
Width: 136.3 mm, depth: 104.0 mm, height: 36.8 mm (except the protruding part)
Approx. 300g
Temperature: 5°C to 35°C (no condensation)
Temperature: -10°C to 60°C (no condensation)
European EN Standard (EN55022 Class A, EN55024)
American FCC Standard (FCC part 15 Class A)
Description
Break
Address
Data
Range
Comparison
-
-
Yes
-
Yes
-
-
Time
Trace
Measurement
-
Yes
Yes
-
-
Yes
-
-
-
-
1. Outline
RAM
Monitor
-
-
-
-
-
-
Yes
-
-
Page 14 of 65
Advertisement
Table of Contents
