Renesas R0E00030AKCT00 User Manual page 36

E30A Emulator User's Manual
(2) Data acquisition interval in MCU running state (1 - 100) ms
Specify the data acquisition interval (byte or word data). At this interval the functions such as the RAM monitor acquire
the memory data while the user program is running. 1 - 100 ms can be specified.
Note on Data Acquisition during MCU Execution:
Using a function that acquires the memory data during user program execution, such as RAM monitor
function, results in the realtime capability becoming impaired because the debug monitor program
intervenes. Also, in order to complete processing of the debug monitor program as fast as possible, do
not operate the MCU's internal DMA during the processing.
(3) Do not communicate with MCU while target is executing.
Specify whether or not to communicate with the MCU when executing a user program. While the user program is running,
the emulator communicates with the MCU, for example, to check the operating status of the MCU, or to receive the trace
information from the MCU.
The PLL clock divided by the base clock divider is used for communication between the emulator and the MCU.
Therefore, when executing the STOP or WAIT instruction, or when temporarily switching to the PLL self-oscillation
mode, select this check box to avoid communication breakdown. The debug function cannot be used because the emulator
does not communicate with the MCU when executing the user program. However, it is possible to press the stop button
after restored to the base clock specified in the Clock column.
3.2.4 Script Tab
This tab permits you to specify a script file.
(1) Init File
If you have any script that is automatically executed at startup, specify that file.
- Click the "Refer..." button to open the Select Script File dialog box.
- Select the desired script file.
R20UT0422EJ0501 Rev.5.01
Mar 15, 2016
3. Starting Up the Emulator Debugger
Page 36 of 65