Table of Contents
Advertisement
E30A Emulator User's Manual
Cautions to Be Taken for the AC Adapter:
Use only the AC adapter included in this product. Do not use the AC adapter for other equipment.
The DC plug of the included AC adapter has the below polarity.
Cautions to Be Taken for Turning On the Power:
Turn ON/OFF the power of the emulator and user system as simultaneously as possible. If you cannot
turn on the powers simultaneously, turn on the emulator first and then the user system.
When turning on the power again after shutting off the power, wait about 10 seconds.
Cautions to Be Taken for Handling This Product:
Use caution when handling the product. Be careful not to apply a mechanical shock.
Do not touch the connector pins of the emulator main unit and the target MCU connector pins directly.
Static electricity may damage the internal circuits.
When attaching and removing the cable, hold the plug of the cable and do not touch the cable. When
installing the emulator, do not flex the cable excessively or pull the emulator or the board by the cable
connected to it. The cable may cause a break.
Do not tape the flexible cable or apply adhesives to secure the cable. The shielding material on the
surface of the cable may come off.
Caution to Be Taken for System Malfunctions:
If the emulator malfunctions because of interference like external noise, do the following to remedy the
trouble.
(1) Exit the emulator debugger, and shut OFF the emulator and the user system.
(2) When turning the power ON again, wait more than 10 seconds. Then start up the emulator
debugger.
Caution to Be Taken for Disposal:
Penalties may be applicable for incorrect disposal of this waste, in accordance with your national
legislation.
European Union regulatory notices:
Renesas development tools and products are directly covered by the European Union's Waste
Electrical and Electronic Equipment, (WEEE), Directive 2012/19/EU. As a result, this equipment,
including all accessories, must not be disposed of as household waste but through your locally
recognized recycling or disposal schemes. As part of our commitment to environmental responsibility
Renesas also offers to take back the equipment and has implemented a Tools Product Recycling
Program for customers in Europe. This allows you to return equipment to Renesas for disposal through
our approved Producer Compliance Scheme. To register for the program, click here
"http://www.renesas.com/weee".
R20UT0422EJ0501 Rev.5.01
Mar 15, 2016
CAUTION
Precautions for Safety
Page 8 of 65
Advertisement
Table of Contents
