Retrieving The Equipment Log Information - Brother MFC Series Service Manual

2.3

Retrieving the Equipment Log Information

<Function>
This procedure retrieves the log information from the machine to the connected PC as
electronic data.
<Operating Procedure>
(1) Turn on your PC.
(2) Create an arbitrary folder in the C: directory and save the readback tool (rb2k03.exe)
and PJL command file (brmainten_77.pjl) in that folder.
Note: The rb2k03.exe file is available only in Windows
(3) Switch the machine to the maintenance mode. (Refer to
(4) Connect the machine to your PC using a USB cable.
(5) On the PC, start Command Prompt and change to the directory where the readback
tool is located.
(In the example below, a "SendPJL" folder is created in the "C:" directory and the
readback tool is saved in that folder.)
(6) In Command Prompt, type "rb2k03.exe brmainten_77.pjl brmainten_77.txt /T3" and
press the Enter key. (Be sure to enter a space to the points marked with an asterisk "*"
shown below. rb2k03.exe*brmainten_77.pjl*brmainten_77.txt*/T3 Otherwise, an error
occurs.)
brmainten_77.txt is created in the arbitrary folder.
(7) In Excel, open the created header/footer and delete header/footer added by the PJL
stipulation.
®
Section 1.1
5-69
XP.
in this chapter)
Confidential