Table of Contents
Advertisement
16.4 Error message – "Factory calibration has expired" "
16.5 Reset of the ZRP 6030+
If the firmware of the ZRP 6030+ freezes you can reset the instrument by shutting it
of the instrument completely as described in chapter 5 "Setting up" on page 15.
17 Illustration of the measuring principle
authorized Proceq agent for further
information.
Press the warning triangle and afterwards the
advice "Factory calibration has expired" to
get a more detailed explanation.
The date of the last factory calibration
dates back more than 2 years. It should
be returned to the manufacturer for
checking, calibration and certification.
Contact Proceq or your authorized
Proceq-agent for details.
Page 46
Advertisement
Table of Contents
