Table of Contents
Advertisement
15 Maintenance
15.1 Maintenance to be carried out by the user
You may only carry out the following maintenance and repair yourself:
•
Charging as described in chapter 14.3 "Charging" on page 43.
•
Calibration as described in chapter 7 "Calibrate" on page 16.
•
Cleaning as described in chapter 15.2 "Cleaning" on page 44.
•
Replacing the thermal paper roll as described in chapter 10.3.1 "Replacing
the thermal paper roll" on page 27. (if your instrument is equipped with the
optional thermal printer)
All other maintenance and repair work may only be carried out by Proceq SA
or your authorized Proceq agent, otherwise all warranty will void.
Make sure that the ZRP 6030+ is unplugged and turned off before any
maintenance, except for charging.
The instrument consists of delicate optic and electronic precision parts. Protect
it from shocks, moisture and dust. Please store the instrument in it's carrying
case.
15.2 Cleaning
We recommend that the instrument is checked and certified by manufactuerer or
certified Service partner once in a two year period. Otherwise clean the instrument
periodically using water- and oil-free compressed air (max. 1.5 to 2 bar), or wipe the
exit window on the bottom of the optics housing with a soft brush.
The exit window is coated with a special antireflection coating that must not be
damaged. If the soft brush is not sufficient for cleaning the window, you may use a
soft paper tissue and window cleaning liquid.
The optics housing may not be opened under any circumstances since the
measuring geometry would be misaligned. The measuring geometry can only
be adjusted by means of special testing equipment in our factory.
Page 44
Advertisement
Table of Contents
