Overview Measurements (Sorted); Detailed Entry Information - Proceq ZRP 6030+ Instruction Manual

11.2 Overview measurements (sorted)

11.3 Detailed entry information

This is an example sorted by job. All
measurement files under a certain job are
listed. R values are shown, with their
respective date, time and job listed in the
third column. For average measurements,
the total count of measurements is also
displayed in the last column. Please note:
"Delete all in list" will delete all single
measurements stored under this job.
Tap a single measurement to get additional
options. "Delete" will delete the measurement
irrevocably. Tapping "More" will open a
window where additional information such as
location, manufacturer etc. can be viewed
and adjusted.
The detailed info view displays the
measuring value, the date / time and on
which standard the instrument has been
calibrated for this measurement.
Additional information such as temperature,
humidity and, if applicable, GPS-coordinates
is also displayed.
"On Standard: Yes" indicates that the
measurement has been made while the
instrument was placed on the calibration
standard. It must not be used for evaluation.
Page 29