Navigation In The Menu; Measure Mode; Auto Save Measurements; Average - Proceq ZRP 6030+ Instruction Manual

13.2 Navigation in the menu

13.3 Measure mode

Auto save measurements

and selecting "Measure mode"
Path: ->

Average

and selecting "Measure mode"
Path: ->
Press and
top bar shows the name of the currently
selected option. Most device options can be
configured and turned on/off from the menu.
Refer to chapter 6 "Navigation" on page 15.
and selecting "Measure
By and
mode" you can change the measurement
settings.
"Auto save measurements" defines, whether
all settings are saved to the archive
automatically or need to be saved
individually.
By default, "Auto save measurements" is
activated.
"Average" activates average measurement
mode by default. Average measurement
mode can also be activated by pressing
on the touchscreen when in measurement
mode.
Page 36
to open the menu. The