Ordering Information; Units; Test Discs And Accessories - Proceq DY-2 series Operating Instructions Manual

7. Ordering Information

7.1 Units

Part No. Description
346 10 000 Proceq DY-206 Pull-off tester 6 kN (1349 lbf) including: battery pack, battery charger
with USB-cable, test disc aluminium Ø 50mm/M10, draw bolt M10, torx screwdriver,
software, operating instructions, calibration certificate and carrying case
346 20 000 Proceq DY-216 Pull-off tester 16 kN (3597 lbf) including: battery pack, battery char-
ger with USB-cable, test disc aluminium Ø 50mm/M10, draw bolt M10, torx screw-
driver, software, operating instructions, calibration certificate and carrying case
346 30 000 Proceq DY-225 Pull-off tester 25 kN (5620 lbf) including: battery pack, battery char-
ger with USB-cable, test disc aluminium Ø 50mm/M10, draw bolt M10, torx screw-
driver, software, operating instructions, calibration certificate and carrying case

7.2 Test Discs and Accessories

346 10 500S Test disc steel, Ø 50mm/M10, set of 10
346 10 501S Test disc aluminum, Ø 50mm/M10, set of 10
346 10 502S Test disc aluminum, Ø 20mm/M10, set of 10
346 10 503S Test disc aluminum, 50x50mm/M10, set of 10
346 10 504S Test disc aluminum, 40x40mm/M10, set of 10
346 10 505S Test disc aluminum, Ø 100mm/M10, set of 3
346 10 506S Test disc aluminum, 100x100mm/M10, set of 3
346 10 507S Test disc aluminum, Ø 75mm/M10, set of 5
346 10 250 Draw bolt M10 short for Proceq DY-2
346 10 520 Draw bolt M8 short for Proceq DY-2
346 10 521 Draw bolt M12 short for Proceq DY-2
346 10 530 Adapter plate for large test discs
346 10 220 Battery pack complete
346 10 550 Fixing kit for vertical and overhead surfaces
Note: Proceq test discs require an M10 draw bolt. The M8 and M12 draw bolts are for
use with test discs not supplied by Proceq. For the 25kN instrument an M10 draw bolt is
required for forces above 16kN.
14 © 2014 Proceq SA