Part Numbers And Accessories; Units; Parts And Accessories; Maintenance And Support - Proceq hygropin Operating Instructions Manual

Standards and Regulations applied
CE / EMC immunity
• EMC Directive 2004/108/EG:
• EN 61000-6-1: 2001
• EN 61000-6-2: 2005
• EN 61000-6-3: 2005
• EN 61000-6-4: 2001 + A11
Technical Standard
• ASTM F 2170-09
Special note NIST traceability:
All probes for the Hygropin are factory calibrated referring to the Swiss Calibration Service (SCS).
An individual calibration certificate is included with each probe. SCS is accredited with the Swiss
Federal Office of Metrology which is a signatory of the BIPM (http://www.bipm.org/) Under the
Mutual Recognition Agreement NIST recognizes all registered in the BIPM database.
8.

Part Numbers and accessories

8.1 Units

Part No. Description
780 10 000 Hygropin Unit consisting of: Instrument incl. In-situ probe, carrying case and ac-
cessories (10pcs measuring sleeves, CD incl. HygroLink, documentation)

8.2 Parts and Accessories

780 10 400 In-Situ Probe
780 10 450 Ambient Probe
780 10 470 Humidity Standard 75%RH
780 10 350 Set of Measuring Sleeves 20pcs
780 10 360 Set of Measuring Sleeves 100pcs
780 10 370 Add-on for Wet Concrete 10pcs

9. Maintenance and Support

9.1 Support Concept

Proceq is committed to providing a complete support service for this instrument. It is recom-
mended that the user registers the product on the www.proceq.com to obtain valuable information
on available updates and other useful information.

9.2 Standard Warranty and Extended Warranty

The standard warranty covers the electronic portion of the instrument for 24 month and the me-
chanical portion of the instrument for 6 month. An extended warranty for one, two or three years for
the electronic portion of the instrument may be purchased up to 90 days of purchase.
© by Proceq SA 14