Maintenance instructions
• Apply chassis grease to all the sliding
parts and screw threads.
• Ensure that there is no distortion or crack
on the jack.
If there is, replace it with a new one.
Tool bag
Tool bag
1
Hub nut wrench
2
Towing hook
3
Jack handle
4
Spanner (10 x 12)
5
Screw driver
6
Flat tyre
WAANINNG
w
•
If your vehicle has a flat tyre, pull
off the road.
5
Avoid changing a flat tyre on a slope.
•
When changing a flat tyre on a road,
park the vehicle in a place that will
not obstruct traffic, turn on the
hazard warning signal lights and
6
put up a safety triangle.
•
Move all passengers out of the
vehicle to a safe place and unload
any heavy luggage from the vehicle.
•
Make sure the parking brake
is applied, and the manual
transmission is in 1st or in reverse,
or the automatic transmission in H.
•
In the event of a flat tyre or tyre
burst while driving at high speeds,
hold the steering tightly. NGently
apply the brakes to slow down.
Sudden braking may cause a loss
of steering control and can be
dangerous.
11–6