Engine Immobilizer System; Keys (With Engine Immobilizer System) - PERODUA ALZA Owner's Manual

Engine immobilizer system

The engine immobilizer system is a theft-
preventive system. When the key is inserted
into the ignition switch, the transponder chip
located at the key grip sends an electric
signal to the vehicle. Then, this electric signal
is collated with the ID code pre-registered in
the vehicle. If the electric signal is matched
with the ID code, the engine can be started.
If they are not matched with each other, the
engine cannot be started.
The system is maintenance-free.
2–1
Keys
(with engine immobilizer system)
The vehicle is equipped with two encoded
keys.
Only these two keys make it possible to start
your engine.
WWANINNG
w
Do not make any alterations to the
immobilizer system.
NOTE
1. When it becomes necessary to make
a new key, for example, when you lose
one of your two keys, the remaining
one is needed for Perodua to make a
new key. Hence, be sure to keep one of
your two keys in a safe place.
Both of these two keys have a function
whereby the identification code of the
key can be inputted into the immobilizer
system. That is why you must bring your
key for producing the new key.
2. If you lose all the keys, immediately
consult with an authorized Perodua
Service Centre.
Key number plate
When you make new keys, you are required
to bring your key along with the key number
to an authorized Perodua Service Centre.
Hence, we recommend that you keep the
key number plate in a safe place.
NOTE
You can register and make your keys up
to 4 pieces.