Odometer And Trip Meter; Multi Information Display - PERODUA ALZA Owner's Manual

Odometer and trip meter

F
E
F
E
km
Reset knob
Odometer / trip meter selection switch
Each time this switch is pushed, the indication
changes. The trip meter comes in two kinds:
A and B. To reset the trip meter to zero, keep
pressing the reset knob for about more than
1 second.
5–11

Multi information display

Wverage fuel consumption (WVNG)
x 1000 r/min
This mode will calculate the average fuel
consumption depending on driving pattern.
The display value will be updated every
second and after reset, '-.-' symbol will be
displayed for 500 meters to allow enough
data for a valid calculation.
ROTE
Wverage fuel consumption value calculated
from the total fuel used and the distance
since last value reset.
Distance to empty (AWRNGE)
This mode indicates the estimation of
remaining distance vehicle can run before
fuel is empty.
Value displayed is based on the remaining fuel
volume in tank and fuel consumption figure.
If the displayed value less than 50 km, the
displayed value will show '-.-' symbol.