Multi information display mode flow
1. Press and hold the reset knob more
than 2 seconds to activate the multi
information mode. AVG/RANGE icon will
blink. (If less than 2 seconds, only TRIP A/B
is activated).
2. Press the reset knob once again to select
between the AVG or RANGE mode.
3. If no use of reset knob within 6 seconds,
AVG or RANGE selected symbol will stop
blinking and exit from multi information
mode.
4. During AVG (average fuel consumption
mode) is blinking, pressing more than 1
seconds will reset the AVG.
5. No reset allowed in RANGE (distance to
empty mode).
Illumination control
F
E
Dim
Moderate
Bright
Combination meter dimming mode can be
adjust only with the tail lamp switch is ON.
Push reset knob every 1 second to change
dimming mode. Please refer display mode
flow.
Display mode flow
Trip
Trip
Odometer
metre A
metre B
Display mod flow
ROTE
If the reset knob is not used for 10 seconds,
the display will switch to odometer.
Illumination
control
5–12