Turn signal light control
The turn signal lights flash with the ignition
turned "ON".
Move the multi-control lever up or down to
signal a turn.
The indicator lights on the instrument panel
will begin flashing.
You can also signal a lane change by moving
the lever slightly and holding it there.
ROTE
•
If the lights flash faster than normal, a
bulb may be burned out.
•
If the turning angle is too small, the lever
may not return to its original position
automatically. Return the lever manually
by your hand.
Fog light switch
Lane change
The front fog lights illuminate with the
multi-control switch turned 1st stage or 2nd
stage and with the front fog light switch
turned on.
ROTE
If the multi-control switch is turned off
when the front fog lights are illuminated,
the front fog lights will extinguish.
Front fog light switch
ON
OFF
Light-on-warning buzzer
When you open any of the doors with the
ignition set to "ACC" or "LOCK", and lights
turned on, the buzzer will sound to tell you
that lights are still on.
4–4