Bluetooth Operation - PERODUA ALZA Owner's Manual

Bluetooth Operation

Bluetooth handsfree
Step 1: Enter into pairing mode (discoverable and connectable mode)
1. The pairing mode allows this audio system to be discoverable by your Bluetooth mobile phone.
To enable pairing mode:
a. Car audio system
- Press the Bluetooth button in your car (figure 3) for about 5 seconds until you hear 3
continuous beeps.
b. The audio system displays "PAIRING" and Bluetooth logo "
that the system is now ready to be paired with the mobile phone.
c. Mobile phone
- Enable/switch on the Bluetooth feature in your mobile phone; the symbol ( ) indicates that
the Bluetooth is turned "On".
- Use mobile phone to search for new device in Bluetooth mode, mobile phone will found "BLUETOOTH CAR KIT".
2. Audio system default name is "BLUETOOTH CAR KIT" and passkey is "0000" (enter the number zero for 4 times). User is
allowed to change default name to a user preferences name in it's mobile phone's Bluetooth memory.
3. The audio system will connect to the Bluetooth mobile phone automatically after user key in passkey and LCD will display
"CONNECTED" & " " will stop flashing. New Bluetooth system enter into stand by mode.
4. If connection is failed, the system LCD displays "FAILED".
5. If the Bluetooth is disconnected the system LCD displays "DISCONT"
STEP 2: Automatic connection mode & manual connection mode
1. The audio system is entering into automatic connection mode whenever the ACC power is turned 'on'. The auto connection
mode allows automatic connection between last connected Bluetooth mobile phone with audio system.
2. To enable manual connection mode, it is required to press Bluetooth button for about 2 seconds.
Remark: The above auto & manual connection mode is effective only for the last connected Bluetooth mobile phone & the Bluetooth on mobile
phone must turn ON.
7–11
" will flashing on LCD, indicates
Bluetooth Button
Figure 3