Reverse Sensor - PERODUA ALZA Owner's Manual

Reverse sensor

Refer to zone detection
This reverse sensor is designed to guide
drivers reversing and reverse parking. It
should not be considered as a safety device.
The device will start to operate 0.8 second
after the driver engaged the reverse gear
(with engine started).
When the device start generating, an
intermittent beep sound, the distance between
your vehicle rear bumper and the nearest
o b s t a c l e b e h i n d y o u r v e h i c l e i s
approximately:
16–1
Zone detection
a) 1.4 meter to 1.0 meter
: OFF 210 ms ON 70 ms.
b) 1.0 meter to 0.5 meter
: OFF 70 ms ON 70 ms.
c) 0.5 meter or less Continuous sound
You should reduce vehicle speed and beware
of those obstacles behind. When the beep
sound change from intermittent to continuous,
the distance between your vehicle rear
bumper and the nearest object behind your
vehicle is less than 0.5 meter. You should
immediately stop your vehicle.
Front corner sensor
(if equipped)
buzzer sounds
buzzer sounds
This front corner sensor will assist the driver to
park the vehicle during front straight parking or
side parking into tight space. The device lets
you know the approximate distance between
the vehicle and obstacles while parking.
The front corner sensor works only when
the ignition switch is turned ON, front corner
sensor switch is turned ON and the vehicle
speed is less than 10 km/h.