Post Error Codes - IBM xSeries 240 81Y Hardware Maintenance Manual

POST error codes

In the following error codes, X can be any number or letter.
Error Code/Symptom
062
(Three consecutive boot
failures using the default
configuration.)
101, 102
(System and processor
error)
106
(System and processor
error)
111
(Channel check error)
114
(Adapter read-only memory
error)
129
(Internal Cache error)
151
(Real time clock error)
161
(Real time clock battery
error)
162
(Device Configuration Error)
Important
Be sure to load the
default settings and
any additional desired
settings; then, save
the configuration.
163
(Real-Time Clock error)
164
(Memory configuration
changed)
173
(System CMOS checksum
bad)
204
xSeries 240 HMM
FRU/Action
1. Run
Configuration/Setup
2. Battery
3. Processor Board
4. System Board
1. Processor Board
2. System Board
1. Processor Board
2. System Board
1. Memory DIMM
2. Processor Board
3. System Board
1. Failing Adapter
2. Run Diagnostics
1. Processor
2. Optional Processor
(if installed)
3. Processor Board
1. Run Diagnostics
2. Battery
3. System Board
1. Run
Configuration/Setup
2. Battery
3. System Board
1. Run
Configuration/Setup
2. Battery
3. Failing Device
4. System Board
1. Run
Configuration/Setup
2. Battery
3. System Board
1. Run
Configuration/Setup
2. DIMM
3. Processor Board
1. Run
Configuration/Setup
2. Battery
3. System Board