Alert Settings; Dial In/Out Settings - IBM xSeries 240 81Y Hardware Maintenance Manual

Use the up and down arrow keys to highlight the
options. Online help is available for each option by
pressing F1 while the option is highlighted. General
help is available by pressing F1 from one of the help
windows. To select an option, highlight it and then
press Enter.
3. Highlight an option and then press Enter.

Alert Settings:

Use this window to enable or disable
all Critical, Non-Critical, and System alerts supported by
the ASM hardware.
Use the arrow keys and the Tab key to move between the
fields. Use the left and right arrow keys to enable or
disable each of the alerts. For online help, press F1.
When you have finished, press F6 to save and return to
the main option menu. To return to the main option menu
without saving, press Esc.

Dial In/Out Settings:

This window is divided into
two sections:
Dial In (used to configure dial in settings)
Dial Out (used to configure dial out settings).
To use the Dial In portion of this window, use the Tab key
or the arrow keys to move the cursor to User Profile to
Configure. Then use the left and right arrow keys to
select a User Profile. Once you have selected a User
Profile, you can set the following values:
Login ID
Password
Dialback (enable or disable)
Number (used for dialback only)
Read Only Access (enable or disable)
Dial In (enable or disable)
Dial In Delay (minutes)
When you have finished, press F6 to save and return to
the main option menu. To return to the main option menu
without saving, press Esc.
To use the Dial Out portion of this window, use the Tab
key or the arrow keys to move the cursor to User Profile
to Configure. Then use the left and right arrow keys to
select a User Profile. Once you have selected a User
Profile, you can set the following values:
Login ID
Password
Enable or disable the currently selected entry
Number
PIN
Connection Type (numeric, alphanumeric, serial,
TCPIP)
Description
Dialout Retry Limit
65
xSeries 240