Table of Contents
Advertisement
POST beep codes
POST emits one beep to signal successful completion. If POST detects a problem
during startup, other beep codes might occur. Use the following beep code
descriptions to help diagnose and solve problems that are detected during startup.
Note: See the Problem Determination and Service Guide on the IBM System x
Repeating long beeps
Other beep codes
POST error codes
The following table provides an abbreviated list of the error codes that might appear
during POST. See the Problem Determination and Service Guide on the IBM
System x Documentation CD for more information about the POST error codes. To
check for updated technical information, complete the following steps.
Note: Changes are made periodically to the IBM Web site. Procedures for locating
1. Go to http://www.ibm.com/systems/support/.
2. Under Product support, click System x.
3. Under Popular links, click Software and device drivers for firmware updates,
4. From the Product family menu, select System x3100 and click Continue.
v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v See the parts listing in the Problem Determination and Service Guide to determine which components are
customer replaceable units (CRU) and which components are field replaceable units (FRU).
v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a
trained service technician.
Error code
Description
062
The server failed to start on three
consecutive boots using the default
configuration.
101, 102
A tick timer internal interrupt, internal timer
channel 2 error occurred.
40
System x3100 Type 4348: Installation Guide
Documentation CD for more information about the POST beep codes.
A memory error has occurred. Make sure that all DIMMs are correctly
installed. For additional information, see beep code 3-3-3 in the Problem
Determination and Service Guide on the IBM System x Documentation CD.
See the Problem Determination and Service Guide on the IBM System x
Documentation CD for information about other beep codes.
firmware and documentation might vary slightly from what is described in this
document.
or click Publications lookup for documentation updates.
Action
1. Update the system firmware to the latest level.
2. (Trained service technician only) Replace the
system board.
(Trained service technician only) Replace the system
board.
Advertisement
Table of Contents
